Composite Sony f5-F55 COMPOF5-F55
Ralisez des prises de vue la main en toute scurit et ajoutez des accessoires votre appareil Sony F5 ou F55 avec cetappareil photo COMPOSITEdeSHAPE.Cette plate-forme est une plate-forme d'paule LWS de 15 mm rglable, lgre et compacte conue pour les camras So
Ralisez des prises de vue la main en toute scurit et ajoutez des accessoires votre appareil Sony F5 ou F55 avec cetappareil photo COMPOSITEdeSHAPE.Cette plate-forme est une plate-forme d’paule LWS de 15 mm rglable, lgre et compacte conue pour les camras Sony F5 ou F55.Il est construit autour de la plaque de base Paparazzi Riser, d’une paire de blocs de tige LWS de 15 mm et d’un ensemble de quatre tiges de 8 ’15 mm. Pour la prise de vue l’paule, deux poignes, une poigne suprieure Paparazzi et un paulire sont inclus pour une varit d’options portables.
Les poignes sont dotes de la technologie brevete de bouton-poussoir ressort de SHAPE qui vous permet d’ajuster rapidement l’angle des poignes la vole en appuyant simplement sur votre pouce.Ils se montent sur la paire avant de tiges de 15 mm.L’paulire composite rglable est rglable et se monte sur les tiges arrire de 15 mm.Pour un soutien et un confort supplmentaires, le coussin dorsal inclus se fixe l’arrire de l’paulire et peut accepter des contrepoids disponibles sparment si ncessaire.Lorsque vous avez besoin de monter votre plate-forme sur un trpied, la plaque de base Paparazzi comporte des filetages 1/4 ‘-20 et 3/8’ -16 sur le fond.
Lapaire de formes de 15 mm femelle – tige femelle (8 ‘)sont des tiges en aluminium anodis avec des extrmits femelles filetes 1/2′ -13.
Les tiges ont une longueur de 8 ‘(203 mm) et un diamtre de 0,59’ (15 mm).Vous pouvez utiliser les tiges femelle-femelle de 15 mm (8 ‘) avec la tige mle-femelle de 15 mm (4’ / 101,6 mm), la tige femelle-femelle 15 mm (6 ‘/ 152,4 mm), la tige noire et le bloc de tige coulissante.
Le Composite Sony f5-F55 de SHAPE a t conu pour les DSLR et les camras vido. Il permet une transition rapide du trpied l’paule en un simple clic. Montage simple et rapide avec une cl Allen de 4 mm (5/32 po). Chaque module de support peut tre assembl ou dmont facilement pour le transport. Aucun outil n’est ncessaire.
Quick handle rod bloc (HAND5)
The SHAPE Quick handle rod bloc is a professional video stabilization accessory with 2 camera handle grips, each providing an individual rotation angle of 360. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle.
SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock.
Paparazzi riser 15 mm rod system (ROD2)
Use the SHAPE Paparazzi Riser/15 mm Rod System as a base to attach accessories to your DSLR or small camcorder. This system displaces the weight of accessories from the camera to the rods/riser. The Paparazzi riser adds 2 to the camera height while its mounting-screw slot allows for up to 4 of front-to-back adjustment. The 15 mm rod system offers thumbscrew-locking 8 rods with Allen key vertical adjustment (up to 1.375). This riser/rod system can work with various on-camera accessories such as a lens support, matte box, lens adapter, or follow focus.
The Paparazzi Riser from SHAPE is a 2 fixed-height camera riser offering either parallel or perpendicular camera support. The risers top surface includes a 4 sliding screw slot that enables the camera to be adjusted front-to-back or side-to-side, depending on the risers orientation. This Paparazzi Riser features several 1/4-20 and 3/8-16 threaded holes. The hole located on the base is used to attach the riser to a camera support, while the front and rear holes can be used to attach various accessories such as a sliding rod block.
Pair of rod 15 mm female-female rod (8 in) (2ROD15FF8)
The SHAPE pair of 15 mm 8 female-female rods are anodized aluminum rods with 1/2-13 threaded female extremities. The rods are 8 (203mm) long and have a diameter of 0.59 (15 mm). It is compatible with 15 mm 4 or 6 male-female rods, rod bloc, and sliding rod Bloc.
Paparazzi with Bloc (PA001BLOC)
The SHAPE Paparazzi with Bloc is an ergonomic-designed Paparazzi Handle screwed tight to a Rod Bloc by two 1/4 screws. The Handle features a total of 20 screw-holes for attaching accessories, and the Bloc mounts 15mm rods and keeps the Handle parallel with a camera. You can slide the Bloc up and down the rods and tighten it into position by a red lever on the side. Both the Handle and Bloc are totally solid not at all hollow and are both water cut / laser cut, as opposed to being molded. The 20 screw-holes are a mix of 1/4, 3/8 and 1/2 sizes and all run completely through from end to end. They are positioned vertically or horizontally along the Handle. The 1/4 and 3/8 holes can take on most any 1/4 and 3/8 accessories like lights, monitors, mics, grips, remote controls, recorders, articulating arms, wireless audio receivers, camera plates, and more. And into the 1/2 holes you can screw in male-threaded SHAPE rods (2ROD15MF4, 2ROD15MF6) . The diverse set of screw-holes lets you get very creative in dressing up your rig. And the ability to screw in rods lets you just as creatively extend your rig.
Pair of rod 15 mm female-female rod (8 in) (2ROD15FF8)
The SHAPE pair of 15 mm 8 female-female rods are anodized aluminum rods with 1/2-13 threaded female extremities. The rods are 8 (203mm) long and have a diameter of 0.59 (15 mm). It is compatible with 15 mm 4 or 6 male-female rods, rod bloc, and sliding rod Bloc.
Composite mini shoulder pad (SHPAD3)
The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently.
Back pad (PAD1)
The back pad (PAD1) features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attach or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pads position can be adjusted to the users preference up to 2 vertically and 360 horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights.

Reviews
There are no reviews yet.