The GearTree Home Studio Set from Falcam combines multiple types of photographic equipment stands and mounts into one, with an integrated design for efficient use in small spaces. Cameras, microphones, monitors, lights, and other types of photographic equipment can be installed on the GearTree column, freeing up the space usually occupied by multiple stands so you can have a powerful shooting platform in a small room.

Falcam Floor-to-Ceiling Stand for GearTree
This Floor-to-Ceiling Stand from Falcam is part of the GearTree Home Studio System. This sturdy aluminium pole has an adjustable height and can be mounted in rooms with ceilings from 6.9′ to 8.5′ high. Once set in place, a variety of extension arms, pneumatic arms, and triangular extension arms may be attached to create a customized home studio with a tiny footprint.

NOTE: Not suitable for use in rooms with suspended ceilings.

Falcam Extension Column for GearTree Stand (1.6)
This Extension Column for GearTree Stand from Falcam is a durable, lightweight aluminium column that adds 1.6 feet to the height of the GearTree Studio Stand for use in rooms with very high ceilings.

Falcam Basic Extension Grip Arm for Geartree
This Basic Extension Grip Arm from Falcam adds 10.6″ of extension to the Geartree studio stand. It attaches using a standard 5/8″ stud and has a 5/8″ receiver with locking knob on the end. Up to three of the extension Grip Arms can be stacked and used to extend various equipment to broaden the shooting range.

Falcam Geartree Clamp with Three 5/8″ Receivers
This Geartree Clamp with Three 5/8″ Receivers from Falcam employs a clamping structure to fix accessories to a floor-to-ceiling stand, light stand, or desk stand to connect compatible brackets or arms. It features three 5/8″ stud receivers and three wear-resistant POM ring adapters to fit 1.65, 1.57, and 1.38″ diameters of round pipe.

Falcam Geartree Clamp with 5/8″ Receiver
This Geartree Clamp with 5/8″ Receiver from Falcam employs a clamping structure to fix accessories to a floor-to-ceiling stand, light stand, or desk stand to connect compatible brackets or arms. It features one 5/8″ stud receiver and three wear-resistant POM ring adapters to fit 1.65, 1.57, and 1.38″ diameters of round pipe.

Falcam Articulated Boom Arm for Geartree
Boom Arm from Falcam adds an 18″ articulated extension to the Geartree studio stand. The precision-machined aluminium sections feature stainless steel springs that provide a counterbalance load capacity of up to 1kg. The end of the boom arm features a mini ball head for adding a camera, microphone, compact light, monitor or more.

Falcam GearTree Table Top (Rectangular, 11 x 15.4″)
Attach this rectangular GearTree Table Top to the Falcam desk stand or studio stand and place a laptop, switcher, stream deck, or other accessories onto it for easy access. The integrated 5/8″ stud at the bottom easily attaches directly to the GearTree basic extension arm or pneumatic arm. This 11 x 15.4″ tabletop can support devices up to 20kg. Aluminium alloy construction ensures it is lightweight and durable.

Falcam Full Motion Swivel Arm
Connect this Falcam Full Motion Swivel Arm to your desk stand to mount and adjust fill lights or cameras for your content creation needs. One end of the swivel arm has a 5/8″ stud and the other has a 5/8″ receiver. It can support equipment up to 19.8 lb and it has a height adjustment range of up to 11.8″. Aluminium alloy construction ensures it is durable and lightweight.

Falcam Geartree 3-Way Roll Head
Pan, tilt, or roll your camera with this Geartree 3-Way Roll Head from Falcam. A 1/4″-20 screw on the quick release plate is compatible with your DSLR camera up to 6.6 lb. The head attaches to the Falcam Geartree stands with the integrated pin and is compatible with F22 and F38 quick release accessories thanks to its quick release mount. Adjusting the position of your camera is a breeze with the built-in handle and bubble level. Tightening the side knob can adjust the tension or lock the head entirely. Aluminium alloy construction creates a durable and lightweight design.

Falcam Triangle Extension Arm for GearTree Studio Stand
This Triangle Extension Arm from Falcam is a triangular-shaped arm for use with the GearTree Home Studio floor-to-ceiling stand. This 32.3″ long arm connects to the stand’s centre column with two mount adapters and has a 29kg load capacity. The end of the arm features dual 5/8″ receiver sockets

NOTE: Not for use with desk studio products.

Falcam Reversible Mounting Stud for Geartree (15.8mm)
This Reversible Mounting Stud for Geartree from Falcam allows the Basic Extension Grip Arm and Full Motion Swivel Arm accessories from the Geartree system to be attached to any available mounting holes. The standard dimension adapter allows other brand adapters also to be attached to the Falcam Geartree. This stud is compatible with 5/8″ receivers and is reversible. This mounting stud is machined from stainless steel.